WE-T113 Temperature and Humidity Transmitter RS485 LoRa
- Support -40℃~125℃ conventional temperature range, other ranges can be customised；
- Support different levels of accuracy of temperature and humidity probes to meet different accuracy requirements；
- The transmitter body adopts LoRa type to support 410MHz~490MHz band range and SMA antenna interface; 4G type to support full network communication；
- The transmitter communicates with the WES Edge Computing Gateway via the WES-WIO wireless terminal communication protocol，Real-time reporting of on-site temperature, humidity and condition detection data；
- External temperature and humidity probe, optional and customisable temperature and humidity detection range and installation methods；
WE-T113 is a series of temperature and humidity monitoring transmitters，Transmission methods include LoRa, RS485, 4G, NB,etc.，Battery-powered and 24V power supply options。Transmitters with highly stable digital sensors，Realise real-time monitoring and calculation of temperature and humidity on site，Remote communication using LoRa, RS485, 4G , NB and other communications，Combined with WES’s Industrial Edge Computing Gateway products，Upload to WES Device Management Platform，Realise real-time acquisition, analysis and calculation, storage and display of temperature and humidity physical quantities on site。
Separate transmitter body and probe design，For on-site measured media，Temperature and humidity range，and different requirements such as installation methods，Provides a variety of temperature and humidity ranges,Temperature and humidity probes for installation specifications，Optimal matching of application requirements，Can be widely used in buildings, industrial sites, municipalities and other applications。
| functional category | Functional Description | note |
| communication interface | LORAcommunication port | Antenna connector type: SMA female
Support 410.125~490.125MHz band Maximum 22dbm transmitter power， Maximum -147dbm reception sensitivity, open line-of-sight 5KM signal coverage capability |
| 4G | MQTT、HTTP、WES cloud service agreement
LTE FDD B1/3/5/8 LTE TDD B34/38/39/40/41（full band） speed(Mbps) LTE FDD：10.3(DL)/5.1(UL) LTE TDD：9.1(DL)/3.1(UL) |
|
| RS485 | communication protocols compatibility WES-IO（fixation9600bps）and Modbus protocol
baud rate 2400、4800、9600、19200、34800、57600、115200 data bit 7bit、8bit stop bit 1bit、1.5bit、2bit parity bit None、Odd、Even |
|
| NB | LTE Cat NB2：B3/B5/B8
speed(kbps)：Single-Tone：25.5(DL)/16.7(UL) Multi-Tpne：127(DL)/158.5(UL) |
|
| UI | 1* keystroke input | Refer to UI specification definition, multi-function buttons |
| 2* LED indicator light | System、LoRa Communication Indicator Light | |
| screen | 128*64 fractional colour print LCD
Display of sensor values and status information Setting up the interaction |
|
| electricity supply | Lithium battery power supply | 19000mAh，lithium battery |
| 24VDC electricity supply | Wide voltage input，9~30V | |
| environments | working environment | working temperature：-20°~70° Working relative humidity：5% ~ 95% |
| Storage environment | Storage temperature：-40°~ 85° Storage Relative Humidity：5% ~ 95% |
|
| Protection level | waterproof and dustproof | IP67 |
| ESD | 4KV contact，8KVnon-contact | |
| physical property | Exterior Dimensions | 78（ width）*121（height）*51.4（depths）mm |
| Installation | Wall-mounted, pole, hoop, rail mounted | |
| monitors | Measurement type | temperature and humidity |
| Measurement range | temperature：-40~125℃
Humidity：0~100%RH |
|
| Detection accuracy | temperature：±0.2℃
Humidity：±2%RH（selectable±3%RH，±5%RH） |
|
| minimum resolution | temperature：0.1℃
Humidity：1%RH |
|
| stability | <0.25%RH/Y（Specific to the sensor）
<0.02℃/Y（Specific to the sensor） |
|
| Probe mounting method | Flange mounting, other mounting options can be customised |
Related products
All Products
All Products
All Products
All Products
All Products
All Products