WE-T100 Water Pressure Hussman Interface Sensor
- Supports rail, wall, ring, hoop and other mounting methods；
- P0 type supports 19000mAh large capacity lithium battery，Typical endurance of 5 years for a 5-minute reporting cycle and up to 15 years for a 1-hour reporting cycle；
- Supports rich fault detection functions, including pressure threshold overrun, abnormal pressure value change, low battery and other fault detection，Through the WES Device Management Platform，Notify maintenance staff by SMS and email；
- Supports high definition LCD display，Matching LED indicators and buttons，You can view the pressure value and alarm information in real time on site；
WE-T100 is a range of pressure monitoring transmitters，Transmission methods include LoRa, RS485, 4G, NB, etc.，Battery-powered and 24V power supply options。The pressure transmitter uses a high stability digital sensor，Realisation of real-time monitoring and calculation of on-site pressure，Remote communication using LoRa, RS485, 4G , NB and other communications，Combined with WES’s Industrial Edge Computing Gateway products，Upload to WES Device Management Platform，Realise real-time acquisition, analysis and calculation, storage and display of on-site pressure physical quantities。
Separate transmitter body and probe design，For on-site measured media，Pressure range，and different requirements such as installation methods，Multiple pressure ranges available，Pressure probes for installation specifications，Optimal matching of application requirements，Can be widely used in buildings, industrial sites, municipalities and other applications.
| functional category | Functional Description | note |
| communication interface | LORAcommunication port | Antenna connector type: SMA female
Support 410.125~490.125MHz band Maximum 22dbm transmitter power， Maximum -147dbm reception sensitivity, open line-of-sight 5KM signal coverage capability |
| 4G | MQTT、HTTP、WES cloud service agreement
LTE FDD B1/3/5/8 LTE TDD B34/38/39/40/41（full band） speed(Mbps) LTE FDD：10.3(DL)/5.1(UL) LTE TDD：9.1(DL)/3.1(UL) |
|
| RS485 | communication protocols compatibility WES-IO（fixation9600bps）and Modbus protocol
baud rate 2400、4800、9600、19200、34800、57600、115200 data bit 7bit、8bit stop bit 1bit、1.5bit、2bit parity bit None、Odd、Even |
|
| NB | LTE Cat NB2：B3/B5/B8
speed(kbps)：Single-Tone：25.5(DL)/16.7(UL) Multi-Tpne：127(DL)/158.5(UL) |
|
| UI | 1* keystroke input | Refer to UI specification definition, multi-function buttons |
| 2* LED indicator light | System、LoRa Communication Indicator Light | |
| screen | 128*64 fractional colour print LCD
Display of sensor values and status information Setting up the interaction |
|
| electricity supply | Lithium battery power supply | 19000mAh，lithium battery |
| 24VDC electricity supply | Wide voltage input，9~30V | |
| environments | working environment | working temperature：-20°~70° Working relative humidity：5% ~ 95% |
| Storage environment | Storage temperature：-40°~ 85° Storage Relative Humidity：5% ~ 95% |
|
| Protection level | waterproof and dustproof | IP67 |
| ESD | 4KV contact，8KVnon-contact | |
| physical property | Exterior Dimensions | 78（ width）*121（height）*51.4（depths）mm |
| Installation | Wall-mounted, pole, hoop, rail mounted | |
| monitors | Measurement type | gauge pressure |
| Measurement range | strains：0~1.6MPa | |
| Detection accuracy | strains：±0.5%FS | |
| minimum resolution | 1kPa | |
| stability | ±1%FS | |
| Probe mounting method | Threaded mounting, other mounting options available on request |
Related products
All Products
All Products
All Products
All Products
All Products
All Products
All Products