WE-T214 3-in-1 Soil Sensor
- The PC web page can monitor the three indicators of soil (soil temperature, soil moisture, and soil conductivity) at any time
- Power supply: wide voltage DC9-30V power supply, lithium battery 19000mAh, Solar panel 40W20AH
- Operating temperature range (-20~70)°C
- Fully sealed waterproof design with IP67 protection
- High-gain antenna and multiple verification mechanisms ensure always-on
- It supports high-definition LCD display, with LED indicators and buttons, and can check temperature, humidity, conductivity, etc. in real time on the spot.
The WE-T214 is a high-performance multi-parameter transmitter designed for measuring soil temperature, humidity, and conductivity. The device uses 4G/LoRa communication technology to achieve long-distance and high-reliability data transmission. The power supply mode is DC12-24V DC power supply, which meets the strict requirements of stable operation in industrial sites.
The transmitter has the characteristics of high sensitivity, accurate measurement, stable operation, low power consumption, strong weather resistance, and convenient operation, and can conduct real-time monitoring and accurate analysis of the temperature, humidity and conductivity of the soil on site. Through 4G/LoRa communication technology, data is transmitted over long distances, and the data is uploaded to the equipment management platform and third-party customer platforms of Shidian Technology to complete the real-time collection, comprehensive analysis, data storage and visual display of multiple soil parameters.
The transmitter adopts a split structure of body and probe, and provides a variety of installation methods according to the different soil characteristics and installation conditions of the site, which is widely suitable for fine management and environmental monitoring needs in agriculture, forestry, horticultural planting and other fields.
| Input | |
| Measure variables | Soil temperature, soil moisture, soil conductivity |
| Measurement range | Soil temperature: (-40~85)°C |
| Soil moisture: 0~100% | |
| Soil conductivity: 0~20mS/cm | |
| Performance parameters | |
| Accuracy | Soil temperature: ±0.5°C (0~40°C) ±1.5°C (-40~85°C) |
| Soil moisture: 3% | |
| Soil conductivity: 3% FS | |
| resolution | Soil temperature: 0.1°C |
| Soil moisture: 0.1% | |
| Soil conductivity: 0.01mS/cm | |
| Signal transmission | LoRa network communication |
| It supports the 410.125~490.125MHz frequency band | |
| The maximum transmit power is 22dbm, the maximum -147dbm reception sensitivity, and the signal coverage capability is 5KM in the open viewing distance | |
| 4G network communication | |
| It supports MQTT, HTTP, and WES cloud service protocols | |
| Region: EMEA/Australia/New Zealand | |
| LTE FDD: B1/3/5/7/20/28 | |
| GNSS:GPS/GLONASS/BDS/Galileo/QZSS | |
| LTE-FDD (Mbps): 10 (downlink) / 5 (uplink). | |
| Sampling period | It can be set in 1min~18 hours |
| Reporting cycle | It can be set in 1min~18 hours |
| Positioning cycle | It can be set in 1min~18 hours |
| Electrical specifications | |
| Power supply | 9~30DC, typical 24V |
| Lithium battery, 19000mAh | |
| Solar Panel，40W20AH | |
| environmental conditions | |
| Work environment | Transmitter Host: |
| Temperature: (-20~70)°C, Relative Humidity: 5%~95% | |
| Transmitter Probe: | |
| Temperature: (-40~85)°C | |
| Storage temperature | Transmitter host: (-40~85)°C |
| Transmitter probe: (-40~85)°C | |
| Protection level | Transmitter host: IP67 |
| Transmitter probe: IP68 | |
| Main unit size, weight | 121*51.4*78 mm 190g (main unit does not include antenna and cable) |
| Wire length and connection | Probe Wire: 0.5m + 0.5m waterproof screw cap connector connection |
| Power cord: 0.5m + 0.5m waterproof screw cap connector connection | |
| How the host is installed | Guide rails, hoops, wall mounting, snap rings |
| Probe mounting method | Horizontal buried installation |
Related products
All Products
All Products
All Products
